You might be thinking that there is nothing that says contemporary, more than a wall made of stacked stone backsplash tiles. Whether you are planning to install it on your kitchen floor or on the stairs, this style can certainly give a dramatic look. In fact, these tiles are especially useful in areas where there is a need for an extra splash of color or design and a wall made up of granite or quartz tiles can simply overpower a wall made up of more traditional materials such as plaster or brick.
There are many ways to make use of a stone backsplash tile when you are remodeling or building a new house. If you live in an area that gets regular rain or snowfall, then it might not be a good idea to install a wall made up of tiles. Although they do not require frequent cleaning, they can be rather slippery when wet. To ensure that there are no problems, you should consider using tiles only on the floors.
When using a stone backsplash to replace some of the concrete surface on the floor, it is advisable to first measure the area before you decide to install one. It should not be too large or it will make the remodeling project seem larger than it really is. The area must also be relatively flat. Otherwise, you may find that you have a lot of work to do if you try to use a tile that has not been properly laid. Before you even start your project, you should determine the dimensions of the area that you plan to put the tiles in.
Once you have determined the area where the tiles are to be installed, you can now plan the size of the tiles. The most common sizes that you will find used in stone backsplash are two and three feet long. If you have no idea about the exact size, you can measure the space where the stairs are to be installed. If you are not sure how to measure the stairs, then it might be a good idea to hire a professional to help you.
Once you have determined the exact measurements, you should carefully cut the tiles to fit the floor surface. To save yourself some time, you can use a saw. Use one that is specifically designed for cutting stone slabs. If you are looking for a saw that you can use at home improvement stores, make sure that it is strong enough to support the heavy material being cut. You should also make sure that you can reach the material to help prevent accidents if you accidentally drop any of the slabs.
Cut one slab at a time so that you can lay each slab as you go. You should cut as much of the material as possible, leaving as much space around the edges of the tile as you can. If you have a very tight budget, you can simply skip the last cut and simply lay the remaining slabs on top of each other.
Lay the slabs in rows so that they will not all be the same length. If you try to lay them in a row and end up with some being longer than others, you will need to trim these pieces to make them fit together. You can even lay the slabs on top of each other with spacers between them so that they do not overlap each other.
When you are finished, make sure that you vacuum the area well to remove all dust and grime that has built up over the years. This is also a great way to make sure that the tiles will look their best.
Gallery of 8 Things You Probably Didn’t Know About Stacked Stone Backsplash | stacked stone backsplash
Tags: #stacked stone backsplash #stacked stone backsplash hard to clean #stacked stone backsplash home depot #stacked stone backsplash ideas #stacked stone backsplash installation #stacked stone backsplash kitchen #stacked stone backsplash lowes #stacked stone backsplash outlets #stacked stone backsplash tile #stacked stone backsplash white